High Volume Moister Separator
Advantages of Moisture Separators
A moisture separator is a machine that eliminates the dampness from gases. Eliminating dampness from modern exhausts is fundamentally utilized. In one more sense, Moisture Separators eliminate dampness from water pipes. These machines are made in India by the gas/oil/power industry and domestic businesses. Moisture Separators are perhaps the main modern part since they decrease air, steam, or gas dampness content.
Reviews (0)
Related products
- Other Products
Air Aftercooler
Read moreAir Aftercooler
Category: Other ProductsWhen this air is compressed, moisture (known as humidity) in the air is also compressed at the same rate. If not removed, the water (and other particles) can be harmful to your pneumatically operated equipment. Additionally, through the compression process air becomes hot – contributing to safety concerns and damages to your system, and ultimately a poor quality product.
Air compressor after coolers, moisture separators, and float drains can alleviate this problem through the action of cooling the air, forcing water to condense and with a moisture separator, it simply drains away taking with it many of the other contaminants. The result is clean, cool air that will provide the better quality and increases the performance of your air operated processes.
- Other Products
Air Receiver Tanks
Read moreAir Receiver Tanks
Category: Other Products Tag: Air ReceiversChoose the right Air Receivers
High Volume Moisture Separator is connected in line close to the blast pot to assist in removing moisture from the sandblast system without pressure loss. It is essential to remove the moisture from your compressed air for efficient blasting. Moisture can cause your abrasive to clog, slow down your blasting speed, cause unnecessary breakdowns and even cause your newly blasted surface to rust.
Features of the 1600 CFM High Volume Moisture Separator
- Contains an expansion flow-chamber design with an internal stainless steel coalescer.
- Highly effective moisture droplet removal for peak productive sandblasting with minimal pressure loss
- The moisture Separator is supplied with a manual drain valve
- Air fittings not included – specify and order separately
- Inlet size 2″Blastquip stock several moisture removal systems from moisture traps to air prep systems to completely eliminate moisture from your sandblast pot and make your blasting system highly productive.
The Air receiver tank is a fundamental and significant piece of any packed air framework. Normally a receiver tank is estimated at 2 lady/scfm and expanded to 4-10 lady/scfm of a stream on the off chance of enormous interest swings or floods. In this way, if a blower has a rating of 25 scfm at 100 psig, the collector tank ought to be 50 ladies at least up to 250 ladies if there are huge floods.
- Other Products
Safety Whip Check
Read moreSafety Whip Check
Category: Other ProductsPowerblast LIc is reckoned as one of the prime Suppliers of Safety Whip Check. The Whip Checks are used to prevent any injury due to hose or coupling failure. These Whip Checks are manufactured using optimum quality materials procured from the reliable vendors of the market. Clients can avail the Whip Checks from us in required quantity within the stipulated time frame.
Reviews
There are no reviews yet.